基于高导热材料填充漏失构造的深井换热器性能分析   总被引：1，自引：0，他引：1  

卜宪标  蒋坤卿  李华山  王令宝 《地质学报》2020,94(7):2139-2146

地热供暖可有效缓解北方雾霾天气。干热岩虽然储量丰富，但增强型地热技术由于开发费用较高，裂隙控制以及避免诱发地震的技术尚不成熟，现阶段还不能商业化应用。水热型地热开发技术虽较成熟，但受资源条件的限制，开发规模较小。对于大多地区，受地质构造和资源禀赋的控制，单井产水量较低或者回灌难，开发经济效益较差。深井换热器（DBHE）技术是开采地热水低产区或回灌难地区热能的有效方式，但受制于岩石导热系数低，单井输出功率小，投资回收期长。为提高DBHE的输出功率，本文提出了增强型深井换热器（EDBHE），通过主动将高导热性能的复合填充剂流进漏失构造的方式提高岩石的导热性能，通过调节回压、密度和黏度来控制漏失量。研究结果表明，单井EDBHE十个采暖季的平均取热功率为1002. 34 kW，是DBHE(424. 45 kW)的2. 36倍。而双井EDBHE十个采暖季的平均取热功率更是达到了27501. 61 kW，且热输出稳定，每年的衰减率0. 95%。EDBHE技术有效利用了出水量低或回灌难的水热型热储，大幅提高了其出力，扩大了地热供暖的应用范围。  相似文献   

福州市地表温度热点及时空变化分析     

陈冰倩  张友水  程璟媛  赵雪 《地球信息科学学报》2019,21(5):710-719

中国作为世界第一大发展中国家,近年来城镇化发展迅速,大量自然地表转化为人工地表,从而引起了一系列环境问题,其中以城市热岛问题最为显著。因此如何缓解因城市化进程的加快引起的城市热岛效应已成为热门研究方向。为精确分析城市空间格局对热集聚的影响,本研究利用2000年5月4日的Landsat ETM+和2016年7月27日获取的Landsat OLI两期遥感影像,获取福州市的土地覆盖信息并进行精度验证。在地表温度（Land Surface Temperature, LST）反演基础上通过热点分析（Getis-Ord Gi*）,并结合不透水面（Impervious Surface Area, ISA）信息来研究城市化进程中福州市16 年来 LST的变化特性,空间集聚特性及其产生的尺度效应。热点分析结果显示：① 通过分析福州市内各地和热点中心的距离与LST的关系可较好地反映空间热聚集。2000 年在距热点中心0.97、1.03、0.95 km范围内热聚集明显;2016 年则增长到分别在距热点中心半径1.89、2.01、2.10、2.05、2.13 km范围内热集聚显著且热点区数量也从3 个增加至5 个。热集聚区（热点区和较热区）总面积在此期间从15.7%增至47.3%;② 由于热点图中的热点区和冷点区的形成不单取决于LST的高低,因此热点分析与空间自相关分析方法相比,能更直观地分析土地覆盖变化对LST的影响,了解城市内部热强度变化的细节。本研究采用的热点分析方法可用于城市环境保护与规划,将来还可作为城市土地规划与热环境影响的分析依据。同时可利用热点分析图模拟城市微气候,估算城市绿地降温程度等。此外,未来还可基于此进一步探讨更多时相以及不同城市的对比分析,特别是对不同城市类型如带状城市,多中心城市及中心城市等的研究。  相似文献   

燕山中部大地热流及岩石圈热结构特征——以承德市七家- 茅荆坝地热田为例     

刘峰  王贵玲  张薇  岳晨  陆川  黄起伟  欧小科 《地质学报》2020,94(7):1950-1959

燕山中部地区地热资源丰富,地热地质条件较好,但该地区大地热流测量工作较少,岩石圈热结构研究尚未开展,制约了该地区的地热地质研究与资源勘探开发。本文以该地区的七家-茅荆坝地热田为典型区,结合地温测井、取样测试、数据收集与分析,初步查明燕山中部大地热流特征及浅部-深部岩层热物性特征,填补了大地热流值测量空白区,在此基础上建立了研究区热结构概念模型,估算其深部地温分布。研究得出燕山中部大地热流值变化较大,平均约57 mW/m~2,与周边温泉水温存在较好的相关关系。其中七家-茅荆坝地热田大地热流值较高,为74.9 mW/m~2。通过深部地温分布计算得出七家—茅荆坝地区居里面埋深为21.5～22.8 km,莫霍面温度约815℃,分析结果与前人研究成果较为一致,验证了本文所建立岩石圈热结构模型的准确性。  相似文献   

煤层气赋存的分形特征研究          下载免费PDF全文

王辰  冯增朝  周动  赵东  蔡婷婷 《地球物理学报》2019,62(9):3571-3579

本文利用红外热成像手段，对微小煤样内的甲烷吸附区进行了观察，并评估其吸附特征与在煤中的分布规律.研究表明煤中存在不同尺度与甲烷吸附能力的甲烷富集区，吸附/解吸甲烷时，甲烷富集区比邻近区域具有更明显的升温/降温现象.通过图像处理的方法对不同吸附压力条件下的红外热像图中的甲烷富集区进行提取，采用盒维数进行统计发现甲烷富集区符合分形规律.试验表明随着吸附压力升高，甲烷富集区的分形维数增大，分布初值减小.对两个不同煤田的煤层气富集区进行统计表明：从微米级到千米级尺度范围内，甲烷富集区分布具有分形特征，且分形维数均在1.5~2.00之间.  相似文献   

北京城市下垫面对雾影响的数值模拟研究   总被引：2，自引：0，他引：2       下载免费PDF全文

张亦洲  苗世光  李青春  戴永久 《地球物理学报》2017,60(1):22-36

为了探究北京城市下垫面对雾天气过程的影响,为北京地区雾数值预报水平的提高提供理论基础和科学依据,选取2011年10月29日北京地区雾天个例进行了数值模拟试验,通过对WRF/Noah/UCM模式系统中城市冠层参数的调整,显著改善了模式对此次雾天气过程的模拟效果.使用参数调整后的模式系统通过敏感性试验分析研究了北京城市下垫面对雾发生、发展和消散过程的影响.结果表明:参数调整后的WRF/Noah/UCM模式系统能够与实际观测较相符地模拟此次发生在北京地区的雾天气过程,北京城市下垫面主要通过对温度的改变对雾的形成、发展和消散产生显著影响,使雾不易在城市及其附近形成和发展,延后城市地区雾的形成,但城市的存在也使得城市地区及其附近雾不易消散,相较于没有城市时消散时间延后.  相似文献   

Pixel‐oriented land use classification in energy balance modelling          下载免费PDF全文

Giuseppina Scavone  Vito Telesca  Vicente Caselles  Vito A. Copertino  Vittoria Pastore  Enric Valor 《水文研究》2014,28(1):25-36

Mass and energy transfer between soil, vegetation and atmosphere is the process that allows to maintain an adequate energy and water balance in the earth–atmosphere system. However, the evaluation of the energy balance components, such as the net radiation and the sensible and latent heat fluxes, is characterized by significant uncertainties related to both the dynamic nature of heat transfer processes and surfaces heterogeneity. Therefore, a detailed land use classification and an accurate evaluation of vegetation spatial distribution are required for an accurate estimation of these variables. For this purpose, in the present article, a pixel‐oriented supervised classification was applied to obtain land use maps of the Basilicata region in Southern Italy by processing three Landsat TM and ETM+ satellite images. An accuracy analysis based on the overall accuracy index and the agreement Khat of Cohen coefficient showed a good performance of the applied classification methodology and a good quality of the obtained maps. Subsequently, these maps were used in the application of a simplified two‐source energy balance model for estimating the actual evapotranspiration at a regional scale. The comparison between the simulations made by applying the simplified two‐source energy balance model and the measurements of evapotranspiration at a lysimetric station located in the study area showed the applicability and the validity of the proposed methodology. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

A long‐lived metamorphic history in the contact aureole of the Mooselookmeguntic pluton revealed by in situ dating of monazite grains preserved as inclusions in staurolite porphyroblasts     

I. V. SANISLAV 《Journal of Metamorphic Geology》2011,29(2):251-273

Emplacement of the Mooselookmeguntic pluton, located in the western Maine region of the northern Appalachians, was thought to have occurred towards the end of the Acadian deformation at around 370 Ma. Crystallization ages from different parts of the pluton suggest a more sequential emplacement history over a period of c. 20 Myr. Foliation inflection/intersection axes (FIAs) within porphyroblasts from its aureole reveal at least five periods of garnet and staurolite growth. The orientation of FIAs in both garnet and staurolite porphyroblasts trend successively from ESE–WNW, NNW–SSE, E–W, ENE–WSW to NE–SW. Electron probe microanalysis dating of monazite grains included in staurolite porphyroblasts containing one of these five periods of FIA development reveals a succession of apparent ages from 410 Ma to 345 Ma. A similar spread of crystallization ages can be observed for plutons from Maine and adjacent regions. This succession indicates that deformation and metamorphism began well before and continued long after what is classically regarded as the Acadian orogeny. The thermal structure of the orogen progressively evolved to enable pluton emplacement, and it continued to develop afterwards with magmatic fluids still forming at depth.  相似文献   

A 3D discrete FEM iterative algorithm for solving the water pipe cooling problems of massive concrete structures          下载免费PDF全文

Jing Cheng  T. C. Li  Xiaoqing Liu  L. H. Zhao 《国际地质力学数值与分析法杂志》2016,40(4):487-508

Water pipe cooling has been widely used for the temperature control and crack prevention of massive concrete structures such as high dams. Because both under‐cooling and over‐cooling may reduce the efficiency of crack prevention, or even lead to great harm to structures, we need an accurate and robust numerical tool for the prediction of cooling effect. Here, a 3D discrete FEM Iterative Algorithm is introduced, which can simulate the concrete temperature gradient near the pipes, as well as the water temperature rising along the pipes. On the basis of the heat balance between water and concrete, the whole temperature field of the problem can be computed exactly within a few iteration steps. Providing the pipe meshing tool for building the FE model, this algorithm can take account of the water pipe distribution, the variation of water flow, water temperature, and other factors, while the traditional equivalent algorithm based on semi‐theoretical solutions can only solve problems with constant water flow and water temperature. The validation and convergence are proved by comparing the simulated results and analytical solutions of two standard second‐stage cooling problems. Then, a practical concrete block with different cooling schemes is analyzed and the influences of cooling factors are investigated. In the end, detailed guidance for pipe system optimization is provided. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Study on the urban heat island effects and its relationship with surface biophysical characteristics using MODIS imageries     

Yongnian Zeng  Wei Huang  F. Benjamin Zhan  Honghui Zhang  Huimin Liu 《地球空间信息科学学报》2010,13(1):1-7

This study assesses surface urban heat island (UHI) and its associated surface physical characteristics using remote sensing approaches. TERRA/MODIS images acquired in 2005 in three different seasons were selected to generate land surface tem-perature and surface characteristics for the Changsha-Zhuzhou-Xiangtan metropolitan area in China. The intensity of urban heat is-land effects and its seasonal variations were examined. The result showed that UHI effects were significant both in the summer and the spri...  相似文献   

An analytical solution for describing the transient temperature distribution in an aquifer thermal energy storage system     

Kuang‐Yi Li  Shaw‐Yang Yang  Hund‐Der Yeh 《水文研究》2010,24(25):3676-3688

A mathematical model is developed for predicting the temperature distribution in an aquifer thermal energy storage (ATES) system, which consists of a confined aquifer bounded from above and below by the rocks of different geological properties. The main transfer processes of heat include the conduction and advection in the aquifer and the conduction in the rocks. The semi‐analytical solution in dimensionless form for the model is developed by Laplace transforms and its corresponding time‐domain solution is evaluated by the modified Crump method. Field geothermal property data are used to simulate the temperature distribution in an ATES system. The results show that the heat transfer in the aquifer is fast and has a vast effect on the vicinity of the wellbore. However, the aquifer temperature decreases with increasing radial and vertical distances. The temperature in the aquifer may be overestimated when ignoring the effect of thermal conductivity. The temperature distribution in an ATES system depends on the vertical thermal conduction in the rocks and the horizontal advection and thermal conduction in the aquifer. The present solution is useful in designing and simulating the heat injection facility in the ATES systems. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献